How to make your own paper plane hat

The next time you see a bunch of people wearing a hat with a lot of different colors on it, remember that you can make your very own one from scratch.

The trick?


The process involves taking a sheet of paper and cutting out patterns on it.

The pattern on the paper is just like the ones on the actual hat, but you’ll need to make a few adjustments to the way the patterns align with the hat’s design.

Here’s how it works: Take a sheet from a regular newspaper.

If you have some disposable paper towels in the house, cut a piece of paper that’s 3 inches wide and 3 inches tall.

Cut a piece that’s the same width as the hat.

Cut another piece that is about the same length and 3-inches tall.

(Don’t worry, it’s all just for show.)

Put the paper cutouts in a large bowl and cover them with about 1/2 inch of milk or other liquid.

Then, cover them in clingfilm.

The paper will start to dry out as the milk dries, so you’ll have to let it sit overnight to keep it from drying out too much.

If the paper doesn’t dry out overnight, you can wait until it is.

Let the paper dry overnight or longer, if necessary.

When it’s time to start the paper process, carefully cut out your paper hat.

You’ll need a piece measuring about 4 inches by 6 inches, and the hat should be roughly 1/4 inch thick.

It should be fairly dry, but not wet.

(For the hat you made above, it took about 30 minutes to dry.)

Once the paper hat is ready, lay it flat on a flat surface.

You want the paper to lay flat on the surface of the paper so that it doesn’t stick to the paper.

(If the paper does stick, you may need to sand it with a sanding block.)

Cut out a line that you want to be the paper’s outline.

Using a marker, draw a line from the outline to the center of the hat and from that line to the top of the outline.

You can then trace the outline over the paper with a sharpie.

The paper hat will look a little like this:The next step is to make it into a hat.

The only way to do this is to use some glue or other glue to glue the hat to the surface.

This can be tricky if you don’t know what you’re doing, so be sure to read this guide for more tips on how to make these.

Here are a few of the other hats you can create from paper:If you want a hat that’s more durable than the paper ones you just made, you could also make a metal replica.

To do that, first, put the metal replica in a glass jar and add a little bit of liquid to the jar.

This will make the metal look a bit like a paper hat, and you can use a little water to make sure it stays in place.

When you’re finished, the plastic hat will have a little green “y” that looks a lot like the outline on the metal hat.

The next time that you make a paper-hat hat, don’t forget to grab some glue and some glue-filled paper towels and put them on the tabletop, too.

You’re going to want to make this kind of hat as sturdy as possible.